VRChat 마이너 갤러리 저장소

제 목
일반 오큘러스+바이브 베이스스테이션+바이브 트래커 설정관련 글
글쓴이
Luche
추천
8
댓글
1
원본 글 주소
https://gall.dcinside.com/vr/26837
  • 2018-07-06 08:17:30
							

EDIT 5/24/2018

For more support on oculus x vive, check out this discord! https://discord.gg/XDUXrQC

Here's a quote from one of the users in that discord:

" I highly recommend you make a clean install of steamVR before starting any setup. Uninstall steamVR go into Program Files (x86)Steamconfig delete the Vr setting files in there then go to C:Program Files (x86)Steamsteamappscommon and delete SteamVR folder. Now install SteamVR, and input emulator and do room setup as standing only. SteamVR plays some annoying shenanigans with your room setup if you don't. If you have set up a Vive before on your PC it will be even more messed up."

EDIT 5/5/2018

A few things that may fix/improve your setup.

  • Setup your vive playspace as 'Standing Only'

  • Use OpenVR Advanced to adjust heights for VRChat full body so the legs match more accurately

Interference issues

So far only Vive Tracker 1.0 seems to be reporting some interference issues, solution is to strap the hip tracker on your back! 2.0 trackers have no issues with interference in my experience.


Hi! I'm a small YouTuber who streams and records VRChat content. I've always wanted to have full body tracking in VRChat but I'm not fond of the vive controllers nor the comfort of their headset. After hearing that the Vive Trackers come with dongles and don't require the headset to function, I began looking around for ways to use them together with my Oculus setup! I would love to share with everyone the method I used to achieve my goal!

https://pbs.twimg.com/media/DbuY8f0XkAAlCJw.jpg

Requirements:

  • Oculus Headset

  • 2x Oculus Touch

  • 3x Oculus Sensors

  • 3x Vive Trackers

  • 2x Vive Lighthouse Sensor

This setup is meant to work for 360 tracking, for 180 tracking you won't need as many sensors. These results have been achieved with the 2018 version of the Vive Trackers, I have not tested the older trackers.

We're using a lot of USB slots (7) for this setup!

  • 1x Oculus Headset (USB 3.0 Minimum)

  • 3x Oculus Sensors (USB 2.0 Minimum)

  • 3x Vive Tracker Dongles (USB 2.0 Minimum)

I use USB3 ports for all of them, I also cannot vouch for the Oculus' tracking quality using exclusively USB 2.0 on the sensors. My extra oculus sensor runs on USB 2.0 with an active extension cable.

If you need more ports, check if you have an available PCI-E Slot on your motherboard. If you do you can purchase a USB 3.0 PCI-E card to fill the amount you need. I use one myself with the oculus recommended Chipset: Fresco Logic FL1100EX.

Software

OpenVR Input Emulator v1.3 https://github.com/matzman666/OpenVR-InputEmulator/releases

At first, the Oculus Touch/Headset and Vive trackers are kinda in their own little world, we're going to use this to offset the trackers to match them in our Oculus play space.

Getting SteamVR to Cooperate

Alright! Make sure all your hardware is plugged in and turned on! Keep in mind that during this process your hardware will not show in the SteamVR hardware list.

Pairing the trackers

This went very smooth for me, however I heard that in some systems this may be an issue. Launch SteamVR then pair the trackers by selecting SteamVR > Devices > Pair Controller

If your Oculus is turned on, they won't show in the hardware list.

Setting up vive settings to work without the headset.

Find your SteamVR settings here: steamsteamappscommonSteamVRresourcessettingsdefault.vrsettings

Find and change the following settings:

  • "requireHmd": false,

  • "activateMultipleDrivers": true,

With this change we disable SteamVR's desire to find a Vive Headset and allow it to recognize both Oculus and Vive at the same time.Once this has been changed, save and restart SteamVR.

If you do not see any Vive hardware:

SteamVR > Settings > Developer > Reboot Vive Headset

It will fail, just click cancel after it fails and it will start rebooting the software. Trackers/Lighthouse should now appear alongside the Oculus Hardware!

Merging the Vive Trackers with your Oculus Playspace

Wear your oculus headset and open your SteamVR dashboard, if you Installed OpenVR Input Emulator v1.3 you'll now see a new button at the bottom to enter it's settings. You should notice vive trackers floating somewhere in the area. Grab hold of one vive tracker and move it around to test out the orientation, it will most likely not be oriented in the same direction as your oculus. It's better to base your calibration off one tracker and keep it by hand so you can test how accurate it feels while you swing it around.

Use the WorldFromDriver Offsets, I preferred to get the direction right with yaw first, then location with x/y/z. I found that things got a little messy if you start with x or y first considering the yaw changes the remove_style_tag; padding-bottom: 0.25em; border: 0px; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-stretch: inherit; font-size: 14px; line-height: inherit; font-family: "Noto Sans", sans-serif; vertical-align: baseline; color: rgb(28, 28, 28);">https://i.imgur.com/Vne3NcC.png

Once you're satisfied with the calibration, save your profile and apply the profile to each tracker! You'll have to restart steamVR if you accidentally apply it to your oculus headset.

You've now become a merger of worlds! Enjoy your new trackers!

join me in doing silly poses

https://pbs.twimg.com/media/DbuZG2sW0AAgCPc.jpg

Video demonstration of the whole setup in action!



필요한것

오큘센서3개 (아마 2개로 사각없으면 3개까진 필요없다고 봄)

베이스스테이션 2개

트래커3개

오큘러스 컨트롤러 및 HMD


총 5~6개의 3.0 USB포트 요구


오픈VR 프로그램


스팀VR에서 HMD없이 움직이게 설정하기

steamsteamappscommonSteamVRresourcessettingsdefault.vrsettings


default.vrsettings을 메모장으로 열어서


  • "requireHmd": false 로

  • "activateMultipleDrivers": true 로 


SteamVR > Settings > Developer > Reboot Vive Headset 

하드웨어 리부팅시키기

오픈VR의 WorldFromDriver Offsets 에서 위치 조정해주기

후에 설정저장하라고 되있음



https://gall.dcinside.com/mgallery/board/view/?id=vr_games_xuq&no=7553


VR게임 마이너 갤에도 비슷한글 있는데 여기서 컨트롤러만 제외시키면 됨




MANKALO 개추야 2018.07.06 08:57:21
번호 분류 제목 글쓴이 날짜 추천
37802 일반 h방은 뭐냐 1 기무대띠 2018-08-05 0
37801 일반 프리스타일 댄스룸에 넣을 한곡 2 Luche 2018-08-05 0
37800 일반 판저 포 ~ 4 검은연 2018-08-05 1
37799 일반 이몸 친구 한명도없음 6 ㅇㅇ 175.202 2018-08-05 0
37798 일반 이제 바이브가 1 애플치즈 2018-08-05 0
37797 일반 신사의 최후 5 합체로보 2018-08-05 0
37795 일반 바이브 직구제품은 2 젤독 2018-08-05 0
37794 일반 나도.. 놀아줘 시이부랄... 6 BLOCK_B 2018-08-05 0
37793 일반 새로운 아바타인거시에요 4 모닥불 121.186 2018-08-05 3
37792 일반 뭐뭔데 자고일어나니까 H방은뭔데 3 애플치즈 2018-08-05 0
37791 일반 vr챗 조금 사람을 우울하게 만드는건 있음 3 타나토스시스템 2018-08-05 1
37790 일반 유니티 아바타 업로드하려는데 자꾸 에러나는데.. 2 dd 175.202 2018-08-05 0
37789 일반 이프로그램 아바타 추출 성공한쌀람 있나 2 ㅇㅇ 223.62 2018-08-05 0
37788 일반 갓 전역한 여고생의 오늘의 브랄쳇 4 SenKaZe 2018-08-05 0
37787 일반 오늘 찍은것들 2 여동생구합니다 2018-08-05 0
37785 일반 바이브 유저들 특징 5 Gloryman 2018-08-05 0
37784 일반 H방에 암도 안와서 슬펐음 8 하피핏 2018-08-05 1
37783 일반 트래커 충전 어떻게함? 8 Gloryman 2018-08-05 0
37782 일반 일해라 세관 5 Gloryman 2018-08-05 0
37781 일반 죠죠서기 1 ㅐㅐ 61.79 2018-08-05 0
37780 일반 격투 동작 같은거 자기가 만드는법 아는분 2 차렷 125.186 2018-08-05 0
37779 일반 mr 사고싶어... 나한테 팔아줄사람 없니 ㅇㅇ 218.157 2018-08-05 0
37776 일반 캐릭터 정면보게 어케함? 2 쉔가오랜 211.36 2018-08-05 0
37775 일반 아니 진짜 브알챗에서 맘에드는 사람 만났단 말야? ㅇㅇ 115.139 2018-08-05 0
37774 일반 바이브 팔 사람 없음? 3 옥뜨리 2018-08-05 0
37773 일반 어제자 VRC ㅇㅇ 211.246 2018-08-05 1
37771 일반 마지막 휴가날은 역시 5 공배기 2018-08-05 0
37770 일반 일본인들이랑 놀았어요 2 ㅇㅇ 211.36 2018-08-05 0
37769 일반 여러분들의 알기 싫은 추악한 비밀들이 속속들이 튀어나오는군요 2 아홉개의숲 2018-08-05 0
37768 일반 내 아바타 왜 이러는 걸까 2 하피핏 2018-08-05 0
37767 일반 맵에 오디오 소스 넣었는데 움직일때마다 떨려서 들림 2 하거 2018-08-05 0
37766 일반 향수병땜시 죽겠다 11 Luche 2018-08-05 0
37765 일반 lg vr 이거는 언제나오지 1 부랄 58.228 2018-08-05 0
37764 일반 요 몇일 블랜더 개삽질덕에 머리바꾸기 될듯 쉔가오랜 121.163 2018-08-05 0
37763 일반 유료모델판매 사이트가 오디야? 2 ㅇㅇ 210.2 2018-08-05 0
37762 일반 초강력한 갤럼분들 도와조요 4 ㅇㅇ 222.98 2018-08-05 0
37760 일반 시벌 내가 머리 본 하나 잘못지웠나벼 3 쉔가오랜 121.163 2018-08-05 0
37758 일반 H방 친구랑 간 후기 1 ㅇㅇ 114.200 2018-08-05 5
37757 일반 오늘 처음으로 저댄방 가서 춤 춰봤어! 1 델피늄 2018-08-05 0
37755 일반 난 너무 귀여워 1 꿀뚤 2018-08-05 0
념글 삭제글 갤러리 랭킹